Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Drain Hose Mounting Plate Replacement WH13X29558
This video provides step-by-step repair instructions for replacing the drain hose mounting plate on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Drain Hose Mounting Plate Replacement WH13X29558
Skill Level
Total Parts Cost
$7.42Estimated Savings
$112.5002:27
- Description
This video provides step-by-step repair instructions for replacing the drain hose mounting plate on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the drain hose mounting plate on your ge washer, you will need pliers and a drill driver with a 1/4” bit.
2
Remove the drain line from the wall.
3
Set a drain pan or towel underneath the hose.
4
Pinch the clamp and pull the hose from the washer.
5
Unthread the two screws on the plate.
6
Slide the plate out of the panel.
7
Press the plastic tab and slide the plate off the inner drain hose assembly.
8
To install the new drain hose mounting plate.
9
Slide the drain assembly into the plate until it locks in place.
10
Insert the plate into the panel.
11
Rethread the two screws.
12
While pinching the clamp, slide the hose over the outlet and release the clamp.
13
Insert the drain hose back into the wall drain.
Description
This video provides step-by-step repair instructions for replacing the drain hose mounting plate on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the drain hose mounting plate on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the drain hose mounting plate on your ge washer, you will need pliers and a drill driver with a 1/4” bit.
2
Remove the drain line from the wall.
3
Set a drain pan or towel underneath the hose.
4
Pinch the clamp and pull the hose from the washer.
5
Unthread the two screws on the plate.
6
Slide the plate out of the panel.
7
Press the plastic tab and slide the plate off the inner drain hose assembly.
8
To install the new drain hose mounting plate.
9
Slide the drain assembly into the plate until it locks in place.
10
Insert the plate into the panel.
11
Rethread the two screws.
12
While pinching the clamp, slide the hose over the outlet and release the clamp.
13
Insert the drain hose back into the wall drain.
Applicable Product Model
Parts Needed
Mounting Bracket
$7.42
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com