Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Drain Pump Clamp Replacement WH01X24494
This video provides step-by-step repair instructions for replacing the drain pump clamp in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Drain Pump Clamp Replacement WH01X24494
Skill Level
Total Parts Cost
$20.83Estimated Savings
$112.5002:45
- Description
This video provides step-by-step repair instructions for replacing the drain pump clamp in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the drain pump clamp on your ge washer, you will need pliers.
2
Before you begin the procedure, unplug the power to the washer.
3
Shut off the water supply
4
Remove the drain line from the wall
5
Remove the hot and cold-water supply lines from the inlet valves.
6
Prop up the washer. you can use a wooden block or chair.
7
Slide down the clamp that secures the hose to the drain pump.
8
Detatch the hose and remove the clamp.
9
To install the new drain pump clamp, slide the clamp over the hose.
10
Connect the hose to the drain pump, then slide the clamp to secure it.
11
Prop up the washer.
12
Reattach the hot and cold-water supply lines.
13
Insert the drain hose back into the wall drain.
14
Turn on the water supply
15
Plug in the power.
Description
This video provides step-by-step repair instructions for replacing the drain pump clamp in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the drain pump clamp in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the drain pump clamp on your ge washer, you will need pliers.
2
Before you begin the procedure, unplug the power to the washer.
3
Shut off the water supply
4
Remove the drain line from the wall
5
Remove the hot and cold-water supply lines from the inlet valves.
6
Prop up the washer. you can use a wooden block or chair.
7
Slide down the clamp that secures the hose to the drain pump.
8
Detatch the hose and remove the clamp.
9
To install the new drain pump clamp, slide the clamp over the hose.
10
Connect the hose to the drain pump, then slide the clamp to secure it.
11
Prop up the washer.
12
Reattach the hot and cold-water supply lines.
13
Insert the drain hose back into the wall drain.
14
Turn on the water supply
15
Plug in the power.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com