Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Top Load Washer Power Cord Replacement #134501000
Frigidaire Top Load Washer Power Cord Replacement #134501000
Skill Level
Total Parts Cost
$70.94Estimated Savings
$112.5001:32
- Description
This video provides step-by-step instructions for replacing the power cord on Frigidaire top load washing machines. The most common reason for replacing the power cord is if the washer won’t start and testing the power cord for continuity reveals that it is not providing power to the washer. This is very rare.
All of the information in this power cord replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Wards
All of the information in this power cord replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Wards
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the power cord on your washer, first remove the screws securing the control panel cover. and pull cover off.
3
Now disconnect the power cord wire connector.
4
Use pliers to squeeze the power cord strain relief and pull the old cord out of the main top.
5
Prepare the new power cord for installation by transferring the strain relief from the old cord to the new one.
6
Now feed the new cord through the main top and use pliers to snap the strain relief into place.
7
Connect the wire connector.
8
Replace the control panel cover and secure it with the screws.
9
You’re now ready to plug the new power cord in and confirm that the washer is functioning properly.
Description
This video provides step-by-step instructions for replacing the power cord on Frigidaire top load washing machines. The most common reason for replacing the power cord is if the washer won’t start and testing the power cord for continuity reveals that it is not providing power to the washer. This is very rare.
All of the information in this power cord replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Wards
All of the information in this power cord replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Wards
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the power cord on your washer, first remove the screws securing the control panel cover. and pull cover off.
3
Now disconnect the power cord wire connector.
4
Use pliers to squeeze the power cord strain relief and pull the old cord out of the main top.
5
Prepare the new power cord for installation by transferring the strain relief from the old cord to the new one.
6
Now feed the new cord through the main top and use pliers to snap the strain relief into place.
7
Connect the wire connector.
8
Replace the control panel cover and secure it with the screws.
9
You’re now ready to plug the new power cord in and confirm that the washer is functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com