Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top Load Washer Tub Ring Replacement #W10215107
Whirlpool Top Load Washer Tub Ring Replacement #W10215107
Skill Level
Total Parts Cost
$85.94Estimated Savings
$112.5002:10
- Description
This video provides step-by-step instructions for replacing the tub ring on Whirlpool top-load washing machines. The most common reason for replacing the tub ring is if it is broken, which can cause the washer to jam by allowing clothing to get between the two tubs.
All of the information in this tub ring replacement video is applicable to the following brands: Whirlpool, Crosley, Maytag, Inglis, Kenmore, Roper
All of the information in this tub ring replacement video is applicable to the following brands: Whirlpool, Crosley, Maytag, Inglis, Kenmore, Roper
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the tub ring on your washer, you should first use tape to secure the lid.
3
Next, remove the top two hinge screws securing the main top hinges to the rear panel.
4
Remove the screw securing the wiring and tube cover and pull the cover off.
5
Pull the main top forward lift it up and support it.
6
Now use a flathead screwdriver to release the tabs securing the tub ring and pull the old ring off.
7
Install the new tub ring by aligning the tabs on the ring with the catches on the outer tub then snap the ring into place.
8
Remove the support lower the main top align the slots with the bracket tabs on the frame then push the top back.
9
Replace the wiring and tube cover and secure the screw.
10
Reinstall the hinge screws.
11
Then remove the tape securing the lid.
12
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Description
This video provides step-by-step instructions for replacing the tub ring on Whirlpool top-load washing machines. The most common reason for replacing the tub ring is if it is broken, which can cause the washer to jam by allowing clothing to get between the two tubs.
All of the information in this tub ring replacement video is applicable to the following brands: Whirlpool, Crosley, Maytag, Inglis, Kenmore, Roper
All of the information in this tub ring replacement video is applicable to the following brands: Whirlpool, Crosley, Maytag, Inglis, Kenmore, Roper
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the tub ring on your washer, you should first use tape to secure the lid.
3
Next, remove the top two hinge screws securing the main top hinges to the rear panel.
4
Remove the screw securing the wiring and tube cover and pull the cover off.
5
Pull the main top forward lift it up and support it.
6
Now use a flathead screwdriver to release the tabs securing the tub ring and pull the old ring off.
7
Install the new tub ring by aligning the tabs on the ring with the catches on the outer tub then snap the ring into place.
8
Remove the support lower the main top align the slots with the bracket tabs on the frame then push the top back.
9
Replace the wiring and tube cover and secure the screw.
10
Reinstall the hinge screws.
11
Then remove the tape securing the lid.
12
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Applicable Product Model
Related Articles & Videos
09:15
Part Replacement
Whirlpool Top-Load Washer Leaks? Replace Tub Seal Part # W10324647
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com