Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top Load Washer Drain Pump Replacement #W10276397
Whirlpool Top Load Washer Drain Pump Replacement #W10276397
Skill Level
Total Parts Cost
$93.69Estimated Savings
$112.5002:28
- Description
This video provides step-by-step instructions for replacing the drain pump on Whirlpool top-load washing machines. The most common reasons for replacing the drain pump are when the washer is making loud noises, is leaking water, or won’t drain, but neither the hose nor pump appears clogged.
All of the information in this drain pump replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
All of the information in this drain pump replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning
2
Turn off the hot and cold water supply valves.
3
To replace the drain pump on your washer, you should first disconnect the water supply hoses from the inlet valve.
4
Be prepared for some water to spill out.
5
Now, use tape to secure the lid.
6
Carefully tip the washer forward so the front of the cabinet rests on a blanket or towel.
7
Next, unsnap the drain pump wire cover and push the tab to detach the wire connector.
8
Use pliers to release the clamp securing the drain hose to the pump and pull the hose off.
9
Remove the screws securing the pump to the outer tub and remove the old pump.
10
Install the new drain pump by inserting the pump outlet seal into the port on the outer tub.
11
Secure it with the screws.
12
Slide the drain hose onto the outlet port of the pump and secure it with the clamp.
13
Attach the wire connector and close the cover.
14
Now carefully lift the washer to its upright position. and remove the tape securing the lid.
15
Reconnect the water supply hoses to the inlet valve and turn the water supply back on.
16
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Description
This video provides step-by-step instructions for replacing the drain pump on Whirlpool top-load washing machines. The most common reasons for replacing the drain pump are when the washer is making loud noises, is leaking water, or won’t drain, but neither the hose nor pump appears clogged.
All of the information in this drain pump replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
All of the information in this drain pump replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning
2
Turn off the hot and cold water supply valves.
3
To replace the drain pump on your washer, you should first disconnect the water supply hoses from the inlet valve.
4
Be prepared for some water to spill out.
5
Now, use tape to secure the lid.
6
Carefully tip the washer forward so the front of the cabinet rests on a blanket or towel.
7
Next, unsnap the drain pump wire cover and push the tab to detach the wire connector.
8
Use pliers to release the clamp securing the drain hose to the pump and pull the hose off.
9
Remove the screws securing the pump to the outer tub and remove the old pump.
10
Install the new drain pump by inserting the pump outlet seal into the port on the outer tub.
11
Secure it with the screws.
12
Slide the drain hose onto the outlet port of the pump and secure it with the clamp.
13
Attach the wire connector and close the cover.
14
Now carefully lift the washer to its upright position. and remove the tape securing the lid.
15
Reconnect the water supply hoses to the inlet valve and turn the water supply back on.
16
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Applicable Product Model
Parts Needed
Drain Pump
$93.69
Total$0.00
Related Articles & Videos
09:15
Part Replacement
Whirlpool Top-Load Washer Leaks? Replace Tub Seal Part # W10324647
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com