Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top Load Washer Replace Selector Switch #W10285512
Whirlpool Top Load Washer Replace Selector Switch #W10285512
Skill Level
Total Parts Cost
$83.43Estimated Savings
$112.5001:38
- Description
This video provides step-by-step repair instructions for replacing the selector switch on a Whirlpool top-loading washing machine. The most common reason for replacing the selector switch is when the selector knob isn’t responding to user input.
All of the information for this lid strike replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, Crosley, Amana
All of the information for this lid strike replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, Crosley, Amana
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the selector switch on your washer, first remove the knob.
3
You can use string or wire to make this step easier.
4
Next, insert a putty knife under the control panel to release the two spring clips. then rotate the panel forward.
5
Now detach the selector switch wire connector.
6
Lift the tab and rotate the old switch counter-clockwise to remove.
7
Install the new selector switch by positioning it in the control panel and rotating it clockwise to lock it into place.
8
Attach the wire connector.
9
Align the control panel on the top edge of the upper access panel.
10
Now insert the rear tabs of the control panel into the slots in the main top and snap the panel into position.
11
Replace the knob.
12
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the selector switch on a Whirlpool top-loading washing machine. The most common reason for replacing the selector switch is when the selector knob isn’t responding to user input.
All of the information for this lid strike replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, Crosley, Amana
All of the information for this lid strike replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, Crosley, Amana
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the selector switch on your washer, first remove the knob.
3
You can use string or wire to make this step easier.
4
Next, insert a putty knife under the control panel to release the two spring clips. then rotate the panel forward.
5
Now detach the selector switch wire connector.
6
Lift the tab and rotate the old switch counter-clockwise to remove.
7
Install the new selector switch by positioning it in the control panel and rotating it clockwise to lock it into place.
8
Attach the wire connector.
9
Align the control panel on the top edge of the upper access panel.
10
Now insert the rear tabs of the control panel into the slots in the main top and snap the panel into position.
11
Replace the knob.
12
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Applicable Product Model
Related Articles & Videos
09:15
Part Replacement
Whirlpool Top-Load Washer Leaks? Replace Tub Seal Part # W10324647
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com