Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Gas Dryer Replace Selection Switch #3399640
Whirlpool/Kenmore Gas Dryer Replace Selection Switch #3399640
Skill Level
Total Parts Cost
$62.60Estimated Savings
$112.5001:15
- Description
This video provides step-by-step instructions on replacing the selection switch on Whirlpool gas dryers. The most common reason for replacing the selection switch is when you have trouble selecting a cycle but the selector knob isn’t broken.
All of the information in this switch replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Inglis
Tools used: hex socket
All of the information in this switch replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Inglis
Tools used: hex socket
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the selection switch knob. This may require some effort - You can use string or wire to help pull it off.
3
Next, remove the control panel’s back panel to access the switch itself.
4
Pull the tab and rotate the old switch to release.
5
Squeeze the tabs to release the wire connector.
6
You’re now ready to install the new selection switch.
7
Reattach the wire connector then insert the switch into the control panel and rotate until it snaps into position.
8
Replace the back panel and secure the screws.
9
Reinstall the selection switch knob and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions on replacing the selection switch on Whirlpool gas dryers. The most common reason for replacing the selection switch is when you have trouble selecting a cycle but the selector knob isn’t broken.
All of the information in this switch replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Inglis
Tools used: hex socket
All of the information in this switch replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Inglis
Tools used: hex socket
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the selection switch knob. This may require some effort - You can use string or wire to help pull it off.
3
Next, remove the control panel’s back panel to access the switch itself.
4
Pull the tab and rotate the old switch to release.
5
Squeeze the tabs to release the wire connector.
6
You’re now ready to install the new selection switch.
7
Reattach the wire connector then insert the switch into the control panel and rotate until it snaps into position.
8
Replace the back panel and secure the screws.
9
Reinstall the selection switch knob and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
02:30
Part Replacement
Whirlpool/Kenmore Gas Dryer Valve Solenoid Coil (2 Terminal) #694540
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com