Choose Product
Identify Problem
03
Find Solutions

Montgomery Wards Dryer controls don't work

If your dryer controls are not working, the most common cause is a worn or stripped knob that no longer engages the switch or timer stem: selector, timer, and control knobs can crack or spin freely so the dial or knob not working is the symptom you see. After checking the knobs, inspect the power cord and its terminals next, since a burned or broken cord will kill the whole display or timer and make the dryer controls not responding. If the start button itself fails while the door switch tests good, the thermal fuse is a likely next suspect and can be checked for continuity with a multimeter. Keep it simple: feel for looseness at the knob, look for blackened or exposed wiring at the cord, and test the fuse before replacing larger assemblies. If you need a replacement part, enter your model number on RepairClinic.com to pull up the exact control knob, power cord, thermal fuse, or other part that fits your dryer.

01 - Montgomery Wards Dryer Selector Knob

A dryer selector knob needs to be able to engage and rotate the selector switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Montgomery Wards Dryer Timer Knob

The dryer's timer knob needs to be able to engage and rotate the timer stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
Highly Likely

03 - Montgomery Wards Dryer Control Knob

A dryer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Highly Likely

04 - Montgomery Wards Dryer Power Cord

If the whole dryer display or timer is not working, the dryer's power cord could the source of the problem. Inspect the cord for any breaks or burn marks near the terminals. If the terminals appear blackened or wires are exposed through the cord's insulation, you should replace the power cord with a new one.
Highly Likely

05 - Montgomery Wards Dryer Knob

A dryer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Highly Likely

06 - Montgomery Wards Dryer Thermal Fuse

If just the start button is malfunctioning and you've confirmed the door switch is working properly, then it's possible the thermal fuse has blown. You can use a multimeter to test the fuse for electrical continuity. If the thermal fuse has no continuity, you'll know it has blown and will need to be replaced.
Common

Frequently Asked Questions

My dryer controls are not working: what should I check first?
The dryer knob just spins and won't change the setting; do I need a new knob?
I press Start and nothing happens: could a blown thermal fuse be the cause?
The timer or display is completely dead: can the power cord cause that?
How do I find the correct replacement part for my dryer on RepairClinic.com?

Shop by Montgomery Wards Dryer Parts