Choose Product
Identify Problem
03
Find Solutions

Samsung Dryer leaking water

If your dryer is leaking water — whether you see puddles underneath or water inside the drum — the problem is usually something you can find and fix yourself. The most likely culprit is a damaged fill hose, so check hoses and their rubber washers for cracks or holes and make sure the hose is clamped tight at the inlet valve. If water is spraying into the drum, inspect the steam nozzle for visible damage and replace it if cracked. If your model is not a steam dryer, look for other household sources of moisture before tearing into the machine. A cracked steam generator housing or a loose hose connector are common causes inside steam models, and tightening connections or swapping in new washers often stops the leak. Less commonly, a cracked water inlet valve housing will need replacing. For the exact replacement part for your dryer, enter your model number at RepairClinic.com and you’ll see the parts that fit your machine.

01 - Samsung Dryer Fill Hose

A water leak that is coming from outside the dryer cabinet may be caused by a damaged fill hose. Inspect the hose for small cracks or holes and confirm the hose is secured firmly to the inlet valve. A damaged hose will need to be replaced with a new one. If needed, install new rubber washers at the ends of the hose for a water tight seal.
Enter model number to search for the required part specific to your product
Top Solution

02 - Samsung Dryer Nozzle

A water leak inside the dryer drum may be caused by a faulty nozzle, the component used to spray the hot mist. Inspect the nozzle for any cracks or signs of visible damage and replace the old nozzle with a new one if required.
Highly Likely

03 - Check for other sources of leaks

A non steam dryer is not connected to water and will not cause a leak. Look for other sources of leaks.
Common

04 - Samsung Dryer Steam Generator

A water leak inside the dryer drum may be caused by a faulty or damaged steam generator, the component that converts the incoming water supply to steam. Inspect the steam generator for any cracks in the housing and replace if visibly damaged.
Common

05 - Loose hose connector

Check and tighten hose connections. Install new rubber washers if needed.
Common

06 - Samsung Dryer Water Inlet Valve

A water leak that is coming from inside the dryer cabinet is likely caused by a damaged water inlet valve. Inspect the valve for any cracks in the housing and confirm the valve hoses are secured firmly to the valve and are in good condition. If the inlet valve's housing is cracked or damaged, the component should be replaced with a new one.
Less Common

Frequently Asked Questions

Why is my dryer leaking water?
My dryer is leaking water inside the drum — what parts should I inspect?
I don't have a steam dryer. Can a non-steam dryer still leak water?
How do I tighten or replace a loose hose connector or rubber washer?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by Samsung Dryer Parts