Choose Product
Identify Problem
03
Find Solutions

Montgomery Wards Dryer light is out

If the interior light in your Montgomery Wards dryer is out, the first thing to check is the light socket or bulb connection—loose contacts or a failed socket are the most common causes and you can use a multimeter to see if voltage is reaching the socket. Next in likelihood are control-related failures: indicator lights are built into the control panel, touchpad, or user control and display board, so a dead indicator often means replacing the whole panel assembly; if you also have dryer controls not working or the dryer start button not working, that points to these boards. A faulty door switch is less common but worth testing for continuity since it interrupts power to the lamp when the door closes. The actual light assembly itself is a less frequent cause but inspect it for burn marks or damage and replace if needed. Enter your model number at RepairClinic.com to find the exact replacement light socket, control panel, door switch, or light assembly that fits your dryer.

01 - Montgomery Wards Dryer Light Socket

If the light itself is newly installed or shows no signs of damage, yet still won't work, it's possible the light socket is defective. You can use a multimeter to test whether or not voltage is reaching the light socket. If the meter shows that power is reaching the light socket then it's likely the socket is malfunctioning and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Montgomery Wards Dryer Control Panel

The dryer control panel indicator lights are part of the control panel assembly and cannot be replaced separately. If an control panel indicator light is not working, the entire control panel assembly will need to be replaced.
Highly Likely

03 - Montgomery Wards Dryer Touchpad and Control Panel

The dryer control panel indicator lights are part of the touchpad and control panel and cannot be replaced separately. If an control panel indicator light is not working, the entire touchpad and control panel assembly will need to be replaced.
Highly Likely

04 - Montgomery Wards Dryer User Control and Display Board

The dryer control panel indicator lights are part of the user control and display board and cannot be replaced separately. If an control panel indicator light is not working, the user control and display board will need to be replaced.
Highly Likely

05 - Montgomery Wards Dryer Door Switch

The dryer door switch will turn the interior light off when the door is closed and turn it back on when the door is opened. If the switch is defective, it may be unable to allow voltage to reach the light. You can use a multimeter to test the door switch for appropriate electrical continuity when actuated. If the switch doesn't provide appropriate continuity, it will need to be replaced.
Less Common

06 - Montgomery Wards Dryer Light Assembly

The most likely cause of a dryer interior light not working is a defective light assembly. Inspect the assembly for any visible damage or burn marks and replace as required.
Less Common

Frequently Asked Questions

Why won't my dryer interior light turn on?
How do I test the dryer light socket or bulb?
Can I replace a single indicator light on the dryer control panel?
Could a faulty door switch cause the dryer light to stay off?
How do I find the right replacement part on RepairClinic.com using my model or part number?

Shop by Montgomery Wards Dryer Parts