If your Crosley microwave shuts off after a few seconds, the most likely cause is an intermittently failing door switch or micro switch. Inspect each switch for overheating, arcing, or burned terminals, then use a multimeter to check for consistent continuity. Replace any door switch, primary or secondary interlock switch, or micro switch that is damaged or tests intermittently. If the switches are working, the main control board may be defective, but control boards are often misdiagnosed, so check the more common parts first. A faulty touchpad and control panel can also cause a microwave that stops after 3 seconds, especially when the display works and some buttons respond while others do not. A separate touchpad failure is possible but less common. Enter your Crosley microwave model number to find the exact replacement door switch, micro switch, control board, or touchpad for your appliance. Unplug the microwave before testing or replacing parts. Any repair that requires opening the outer cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge even after the microwave is unplugged. It must be properly discharged before interior work, and this repair may require a qualified technician if you are not familiar with capacitor discharge procedures.
01 - Crosley Microwave Door Switch
A door switch might be failing intermittently. Check each of the door switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it.
Enter model number to search for the required part specific to your product
A micro switch might be failing intermittently. Check each of the micro switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it.
Control boards are often misdiagnosed—before replacing the control board, first check more commonly defective parts, particularly the door switches. If all of the other components are working properly, replace the control board.
To determine if the touchpad and control panel are defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad and control panel.
If the microwave runs for a few seconds and stops the touchpad might be at fault. This is not common. Generally speaking, if the microwave display is working and some of the buttons respond correctly but some don’t, the problem is with the touchpad.
Control boards are often misdiagnosed—before replacing the control board, first check more commonly defective parts, particularly the door switches. If all of the other components are working properly, replace the control board.