Choose Product
Identify Problem
03
Find Solutions

Panasonic Microwave exhaust fan not working

If your Panasonic microwave exhaust fan is not working, a defective door switch is the most likely cause. The door switch must signal the control board that the door is closed before the exhaust fan control can operate. Test each door switch, including the primary and secondary switches, for continuity and replace any switch that fails. Next, check the exhaust fan motor by turning the fan blades by hand. If they do not turn freely, replace the motor. If they turn freely, test the motor for incoming power and continuity. A motor with power that will not run, or one without continuity, needs replacement. A failed thermostat can also prevent the fan from turning on, while a clogged or damaged grille can restrict airflow even when the fan runs. If the motor is not receiving power, the control module may be defective, although it is less common. A micro switch can cause the same door-signal problem. Enter your Panasonic microwave model number to find the exact replacement part. Any repair that requires opening the cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge after unplugging and must be properly discharged. Use a qualified technician if you are not familiar with capacitor discharge procedures.

01 - Panasonic Microwave Door Switch

A defective door switch may not signal the control board that the door is closed, which can prevent the button that controls the exhaust fan from functioning. To determine if any of the door switches are defective, use a multimeter to test each of the switches for continuity. If any of the door switches do not have continuity, the switch or switches should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Panasonic Microwave Exhaust Fan Motor

To determine if the fan motor is defective, remove the fan motor from the microwave and try turning the fan blades by hand. If the blades do not turn freely, replace the fan motor. If the fan blades do turn freely, use a multimeter to test the motor for incoming power and for continuity. If the motor has power but won’t run, replace it. If the motor does not have continuity, replace it.
Top Solution

03 - Panasonic Microwave Thermostat

The thermostat monitors the air temperature and turns on the fan when necessary. If the thermostat is defective, it won’t turn on the exhaust fan at all. Use a multimeter to test the thermostat for continuity. If the thermostat does not have continuity, replace it.
Top Solution

04 - Panasonic Microwave Grille

A damaged or clogged grille can prevent the air from being properly exhausted when the exhaust fan is turned on. Confirm the grille is free of obstruction and, if the grille is visibly damaged, replace the component with a new one.
Highly Likely

05 - Panasonic Microwave Control Module

If the microwave exhaust fan is not working, the control module might be defective. However, this is not usually the case. Before replacing the control module, first check the exhaust fan motor and wiring. If the exhaust fan motor is not getting power, the control module might be at fault and require replacement.
Common

06 - Panasonic Microwave Micro Switch

A defective micro switch may not signal the control board that the door is closed, which can prevent the button that controls the exhaust fan from functioning. To determine if any of the micro switches are defective, use a multimeter to test each of the switches for continuity. If any of the switches do not have continuity, the switch or switches should be replaced.
Common

Frequently Asked Questions

Why is my Panasonic microwave exhaust fan not working?
How do I test a Panasonic microwave exhaust fan motor?
Can a door switch or thermostat cause my microwave fan not to work?
What should I check before replacing the Panasonic microwave control module?
How do I find the correct Panasonic microwave exhaust fan part?

Shop by Panasonic Microwave Parts