Choose Product
Identify Problem
03
Find Solutions

Crosley Microwave exhaust fan not working

When a Crosley microwave exhaust fan is not working, the most likely cause is a defective door switch. The door switch signals the control board that the door is closed, allowing the exhaust fan button to operate. Test each door switch for continuity with a multimeter and replace any switch that fails. Next, check the exhaust fan motor. Turn the fan blades by hand. If they do not turn freely, replace the motor. If they turn freely, test the motor for incoming power and continuity. A defective thermostat is another common cause because it monitors air temperature and turns on the fan when needed. Also inspect the grille for grease, debris, or visible damage that could restrict airflow. If the motor is not receiving power, the control module may be defective, although it is less likely than the motor or wiring. A faulty micro switch can also prevent the control board from recognizing that the door is closed. Enter your model number to find the exact replacement part for your Crosley microwave. If testing requires removing the outer cabinet, unplug the microwave first and use caution: the high-voltage capacitor can store a lethal charge even when unplugged and must be properly discharged. This work may require a qualified technician.

01 - Crosley Microwave Door Switch

A defective door switch may not signal the control board that the door is closed, which can prevent the button that controls the exhaust fan from functioning. To determine if any of the door switches are defective, use a multimeter to test each of the switches for continuity. If any of the door switches do not have continuity, the switch or switches should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Crosley Microwave Exhaust Fan Motor

To determine if the fan motor is defective, remove the fan motor from the microwave and try turning the fan blades by hand. If the blades do not turn freely, replace the fan motor. If the fan blades do turn freely, use a multimeter to test the motor for incoming power and for continuity. If the motor has power but won’t run, replace it. If the motor does not have continuity, replace it.
Top Solution

03 - Crosley Microwave Thermostat

The thermostat monitors the air temperature and turns on the fan when necessary. If the thermostat is defective, it won’t turn on the exhaust fan at all. Use a multimeter to test the thermostat for continuity. If the thermostat does not have continuity, replace it.
Top Solution

04 - Crosley Microwave Grille

A damaged or clogged grille can prevent the air from being properly exhausted when the exhaust fan is turned on. Confirm the grille is free of obstruction and, if the grille is visibly damaged, replace the component with a new one.
Highly Likely

05 - Crosley Microwave Control Module

If the microwave exhaust fan is not working, the control module might be defective. However, this is not usually the case. Before replacing the control module, first check the exhaust fan motor and wiring. If the exhaust fan motor is not getting power, the control module might be at fault and require replacement.
Common

06 - Crosley Microwave Micro Switch

A defective micro switch may not signal the control board that the door is closed, which can prevent the button that controls the exhaust fan from functioning. To determine if any of the micro switches are defective, use a multimeter to test each of the switches for continuity. If any of the switches do not have continuity, the switch or switches should be replaced.
Common

Frequently Asked Questions

Why is my Crosley microwave exhaust fan not working?
How do I test a Crosley microwave exhaust fan motor?
Can a door switch keep the microwave exhaust fan from working?
Should I replace the control module if my microwave fan is not working?
How do I find the correct Crosley microwave exhaust fan part?

Shop by Crosley Microwave Parts