Choose Product
Identify Problem
03
Find Solutions

LG Washer door or lid won't lock/unlock

Won’t your LG washer lid lock or your front-load washer door won't unlock? The problem is usually a damaged or misaligned part around the latch. Start with the boot seal retaining ring, which secures the door boot seal to the front panel. If it is broken or missing, the seal can pull away and keep the door from closing. Next, inspect the lid or door and the door boot seal for damage, distortion, or misalignment. A bent door hinge or lid hinge can also prevent the strike from lining up with the lock. If the washer closes but still has a washer door lock problem, the lid lock, door lock, or lock assembly may have failed mechanically or electrically. A defective lock can keep the washer from starting or spinning, while a stuck lock can leave the washing machine door stuck. Inspect the lid strike or door strike as well, and test the lock switches for continuity if you have the wiring diagram and a multimeter. Enter your LG washer model number to find the exact replacement part for your specific washing machine.

01 - LG Washing Machine Boot Seal Retaining Ring

A washer door boot seal retaining ring is the component that secures the door boot seal to the front panel on front-load washing machines. If the retaining ring is damaged or missing, the boot seal can become detached from the panel and prevent the door from closing and locking properly. If the retaining ring is missing or broken, you should install a new one.
Enter model number to search for the required part specific to your product
Top Solution

02 - LG Washing Machine Lid

If the washing machine's lid is damaged or misaligned, the lid strike won't be able to line up with the lock or latch when you attempt to close the lid. Inspect the lid for damage and replace if necessary.
Top Solution

03 - LG Washing Machine Door Boot Seal

If the door boot seal on front-load washers is damaged or becomes misaligned, it can prevent the door from closing and locking properly. Inspect the door boot seal for any damage and replace the seal if required.
Top Solution

04 - LG Washing Machine Lock

The door or lid lock secures the washer door or lid during operation. Once the door or lid is closed, the washer can begin operating. If the door or lid is not latched shut, the door switch will prevent the washer from operating. If the lock is defective, the washer will not spin or start. The lock can fail either mechanically or electrically. Inspect the lock for damage. If the lock is damaged or does not latch properly, replace it. To determine if the lock has failed electrically, consult your washer’s wiring diagram and use a multimeter to test each of the lock switches, if applicable, for continuity.
Top Solution

05 - LG Washing Machine Door Hinge

If the washing machine's lid strike or door strike does not line up with the lock or latch when you attempt to close the lid or door, it's likely the lid hinge or door hinge is bent or misaligned. This can prevent the door or lid from locking. Inspect the hinge for damage and replace if necessary.
Highly Likely

06 - LG Washing Machine Door Lock

The door lock assembly might be defective. Inspect the door lock for damage. If the door lock is damaged, replace it.
Highly Likely

Frequently Asked Questions

Why won't my LG washer door or lid lock?
Can a bad door lock keep my LG washer from starting or spinning?
What should I check if my LG washer door won't unlock?
How do I fix an LG front-load washer door that won't close or lock?
How do I find the correct LG washer door lock or lid lock replacement part?

Shop by LG Washing Machine Parts