Samsung Washing Machine Parts

Samsung Washing Machine Parts & Repairs

Samsung front-load and top-load washers are known for smart features and efficiency — but they also have well-documented failure points. The door boot seal (gasket) on front-loaders is the #1 Samsung washer repair, followed closely by control boards and drain pumps. Top-load models experience suspension issues and bearing wear. We stock OEM Samsung parts that match your exact model, not aftermarket substitutes that wear out faster.

When your Samsung washer won't drain, won't spin, or leaks from the door, the right OEM part makes all the difference. Use your model number to find the exact replacement — Samsung control boards, door seals, pump assemblies, and suspension parts are engineered for your specific machine.

• Door boot seal leaking or moldy? Front-load door gaskets are prone to mold buildup. OEM Samsung seals maintain the tight compression your washer needs.
• Won't drain or spins slowly? Drain pump failure is common. Verify water isn't backing up into the pump before replacing.
• Loud grinding or rumbling during spin? Tub bearing failure creates that noise. On Samsung front-loaders, the bearing comes as part of the rear drum assembly — that's the OEM repair method.
• Control board error codes or no response? Main control boards run every cycle and safety check. Error codes flash for a reason — an OEM board replaces the failed logic.
• Won't agitate or spin but motor runs? Drive belt, motor coupling, or shift actuator issues. Model-specific diagnosis is essential here.

Find your Samsung washing machine model number on the back of the unit or inside the door frame. Enter it above to see all compatible OEM parts and get same-day shipping on most in-stock items.

Samsung Washing Machine Questions & Answers

Why does my Samsung front-load washer leak from the door?

The door boot seal (gasket) is the most common source of front-load leaks on Samsung washers. Over time, the rubber compresses, tears, or develops mold that breaks the seal. Water then leaks past the seal during wash and rinse cycles. An OEM Samsung door gasket is the fix — aftermarket seals often don't compress evenly and fail faster. You'll find the boot seal code in your parts list when you enter your model number.

How do I know if my Samsung washer has a bad bearing?

A failing tub bearing creates a loud grinding, squealing, or roaring noise that gets worse over time, especially during the spin cycle. You might also notice the drum feels rough when you manually spin it. On Samsung front-loaders, bearings don't come separately — they come as part of the rear drum assembly. It's a bigger repair than on some brands, but OEM Samsung drums are engineered to last. If you hear that grinding noise, the bearing has probably already damaged the drum seal, so OEM replacement of both is the right approach.

What does a Samsung washer error code mean, and can I fix it myself?

Samsung washers flash error codes to tell you what's wrong — dE or DE means door lock failure, UE means unbalanced load, OE means drain problem. While some codes (like unbalanced load) are user fixes, others like dE point to a failed door latch assembly, which requires replacement. A main control board error often shows as a repeating code. The control board is the brain of the washer. When it fails, error codes stop making sense or the washer won't respond at all. An OEM Samsung control board comes programmed for your model — it's a primary reliable fix. Look up your model number to see which error code parts are available.

Should I replace the drain pump, or is it something else?

A washing machine that won't drain or drains very slowly usually points to the drain pump, but not always. First check that the drain hose isn't kinked or clogged — that's a free fix. Next, verify the filter isn't full of debris (lint trap). If water backs up into the pump area itself, the pump is likely failed and needs OEM replacement. Samsung drain pumps come as an assembly, not individual parts. If the pump is the culprit, you'll see water pooling at the bottom of the drum after the cycle ends, or hear the pump motor strain. Order the exact OEM drain pump for your model — it's a high-wear part worth getting right.

Find Your Samsung Washer's Model Number for the Right Parts

To get the correct Samsung washing machine parts online, locate your washer's model number first. This is usually printed on a label found inside the door frame, behind the control panel, or on the back panel. Once you have the model number, enter it in the Repair Clinic search bar to view only the Samsung replacement parts that fit your unit—like drain pumps, door locks, or control boards. For more general washer parts, browse our full Washing Machine Parts section.

Samsung Washing Machine Model Number: Where to Look

Samsung typically places the model number on a label inside the door frame, along the back panel, or along the top edge of the tub opening. Open the washer door or lid and check the frame carefully, then inspect the rear if the label is not there. The model number identifies the entire washing machine, not just a pump, seal, or another individual part. Enter that number in Repair Clinic's search bar, and the catalog will narrow to Samsung parts matched to your unit across every part category. With the full model selected, you can compare compatible parts without sorting through unrelated machines. That means fewer wrong orders and a faster repair.