Kenmore Washer/Dryer Combo Parts

Kenmore Washer Dryer Combo Parts

Kenmore washer dryer combos pack both wash and dry cycles into one compact unit, but when they break down, the repair gets specialized. These all-in-one machines share parts across their wash and dry functions, so you'll need the exact model number to get the right parts. Kenmore combos are built by Whirlpool, LG, or Frigidaire depending on the model prefix — that builder determines which parts you need.

The most common failures in Kenmore combos are door latches that won't engage (stopping the cycle cold), drain pumps that leave standing water, and thermal fuses that blow after a dry cycle completes. Control boards handle both wash and dry logic, so a board failure kills the whole machine. Find your model number on the back or inside the door frame, then match it to the right replacement parts.

• Door latch assembly: Won't start or cycle won't begin; safety interlock switch built into latch
• Drain pump: Water sits in drum after wash phase; motor-driven pump fails over time
• Thermal fuse: Dry cycle runs but produces no heat; one-time safety device that must be replaced
• Control board: No response to button presses; error codes or dead panel; handles both wash and dry sequences
• Water inlet valve: Won't fill during wash phase; solenoid-driven valve controls temperature

Kenmore Washer Dryer Combo: Frequently Asked Questions

Which builder made my Kenmore combo — Whirlpool, LG, or Frigidaire?

Look at your model number's first digits. Kenmore model numbers starting with 110.xxxxx are Whirlpool-built (Duet platform). Models starting with other prefixes are typically LG-built or Frigidaire-built — enter your full model number into the Repair Clinic model lookup and we'll confirm the builder and show you the correct parts. The OEM builder determines which parts fit, so don't guess.

Where do I find my Kenmore combo model number?

The model number is printed on a white label located on the back of the unit or just inside the door frame. It looks like 110. XXXXXX or similar — write down the entire number before shopping for parts. If you can't find it on the machine itself, check your purchase receipt or original paperwork. Once you have it, use the model number lookup tool to confirm compatibility with the part you need.

Why won't my Kenmore combo start — what's the most common reason?

The door latch is the #1 culprit. The latch has a built-in safety switch that tells the control board the door is secure. If the latch is broken or misaligned, the switch never closes and the cycle won't begin — the machine behaves like it's dead. Before buying a latch, make sure the door closes fully and listen for a firm click. If it doesn't click or feels loose, the latch assembly needs replacement.

My Kenmore combo washed fine but won't dry — what should I check first?

The thermal fuse blows after extended dry cycles and is a one-time safety device — once blown, it stops all heat flow. It's a $10 to $20 part and the most common reason a combo won't heat. Second most common is a clogged vent hose, which triggers the fuse to blow as a safety measure. Clear the vent first, then replace the thermal fuse. If it blows again immediately, the heating element may have failed.

Shop Kenmore Washer/Dryer Combo Parts Online

Finding the right Kenmore washer/dryer combo parts online. Use your model number to get the right part. From washers and dryers to commercial units, we carry all the parts you need. Use our model or part number lookup for a precise match. Benefit from our no-hassle 365-day returns and price match. Plus, most parts are eligible for same-day shipping, so your repairs won't be delayed. Common issues like units not starting, not spinning, or vibrating can often be resolved with parts such as door locks, control boards, and suspension rods. For more information about Washer/Dryer Combo Repair and Kenmore Washer/Dryer Combo Parts, visit these helpful resources today. Feel empowered to tackle any repair with our support!

Kenmore Washer/Dryer Combo Model Number: Where to Look

On Kenmore washer/dryer combos, look for the model number label around the door opening or on the rear panel. Open the appliance and check the frame surrounding the door, then inspect the back if you do not see it there. Copy the complete number, including periods, letters, or other characters. Type it into our model number lookup and the catalog narrows to parts made for your unit. This number identifies the entire appliance, so it filters belts, pumps, switches, valves, and every other associated replacement part to your specific combo. You will spend less time comparing listings and can order with confidence knowing the fit is right.