Cub Cadet Lawn Mower Parts

Blade control

NGK spark plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Rear axle assembly

Rear trail shield

Start solenoid

Lawn mower blade spindle assembly. *4 Self tapping screws included. Mounting holes are not threaded see Part Replacement video for thread tapping information

Fuel bowl gasket

Small engine Champion spark plug (RJ19LM). If the engine does not start, the spark plug may be defective. The spark plug should be replaced periodically during regular maintenance.

Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.

Handle-lower po7

Briggs & Stratton Spark Plug (RJ19LM). If the engine does not start or runs poorly then the spark plug may be defective and will need replacement.

Lawn mower trail shield (or rear skirt).

MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.