Poulan Pro Parts

Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Engine zone control cable

Lawn mower trail shield (or rear skirt).

Fuel line kit. Both large & small diameter fuel lines included. The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system. If the fuel line is leaking, replace it.

Fuel Line (Small)- 9/64 (.140) inch OD - (.080) inch ID, W/ Installation instructions.

Bag, blower "vac-n-sac"

Snowblower shear bolt, locking nut sold separately. This part has been updated by the manufacturer; it no longer requires a spacer. Shear bolts are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine by stopping the auger from turning.

Briggs & Stratton snowblower shear bolt kit. 1/4-20 x 1 3/4". Shear bolts are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine. If the shear bolt is broken, the auger won’t be able to turn.

Fuel line (Large). The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system.

Lawn mower control cable. Engine Zone.
The conduit measures approximately 52.5 inches. The cable measures approximately 61.5 inches.

Chainsaw fuel cap with retainer

Deflector.clipping.21.push.blk

Champion spark plug (RCJ6Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.

Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.

Lawn mower blade adapter. If the lawn mower's blade isn't engaging properly, the blade adapter may be stripped. If the blade adapter is stripped, replace it. 1 inch ID.