Maytag HVAC Parts

Run capacitor, round 440 volt 45/5 uf

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Draft inducer motor replacement. If mounted horizontally, related items are needed for replacement motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Furnace flame sensor with wire harness

Screw, 10-24 3/8

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Pressure switch -0.20"pf spst

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Contactor 1 pole, 25fla, 24v

Furnace igniter kit

Silicone rubber adhesive and sealant for felt seals, door gaskets and more. 2 ounces

Limit switch, manual reset

Limit Switch - re-settable

300f m/r rollout limit switch

.43 Natural gas burner orifice