Name: Wire Harness
Brand: Rheem
SKU: i3366480
Price: 47.22 USD
Availability: OutOfStock

Dual Run Capacitor

Compressor run capacitor, 120 volts 15 mfd.

Run Capacitor

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Flame Sensor

Furnace control board. The control board regulates the supply of power to the furnace components.

Control Board

You need Contactor HN51KC024 if you're having trouble with the compressor or fan motor on your air conditioner, furnace, heat pump, or air handler. This genuine OEM single-pole, 24-volt coil contactor has a full load amps (FLA) rating of 30 amps and a locked rotor amps (LRA) rating of 150 amps.

Contactor

The Frigidaire Oven Burner Igniter 5303935066 is a high-quality replacement part that ignites the gas to light the oven burner. It includes 2 ceramic wire connectors and replaces multiple part numbers

Igniter

Limit Switch

Dryer blower wheel. Used on 29 inch Whirlpool built models with lint filter on top. To remove the blower wheel, unscrew the blower wheel  clockwise off the motor shaft.

Blower Wheel

Flame rollout limit switch re-settable 350F

Flame Rollout Limit Switch

Relay

image

Mantis Tiller Transmission Assembly Replacement #400010

This video provides step-by-step instructions for replacing the transmission assembly on Mantis tillers. The most common reason for replacing the transmission assembly is if the tiller is leaking grease or the tines won’t turn and you don’t want to replace any of its component parts individually. All of the information in this transmission assembly replacement video is applicable to the following brands: Mantis Tools used: 7/16” socket and wrench, 5/16” socket, 3/8” socket

Tiller

Heat pump circuit breaker keeps tripping

A wire harness sends power and low voltage signals between the electrical components and the control board. If a wire harness becomes damaged, it can short out causing the circuit breaker to trip. Check the appropriate wire harnesses for breaks or loose connections. A damaged wire harness will need to be replaced.


**We’re excited to be able to offer trade professionals like you substantial volume-based discounts. Our PRO pricing levels are based on your anticipated annual parts spend with us. If your actual monthly spending trends lower than anticipated, your discount may change.

Appliance Parts, Lawn Mower Parts, Heating & Cooling Parts. 365 day returns.

Sign up for your PRO account

Create your account for exclusive discounts and benefits, like:

Your One-Stop

Shop

Join Repair Clinic Pro to unlock technician pricing, same-day shipping, dedicated support, and exclusive benefits tailored for repair professionals.

PRO users get exclusive discounts and benefits, like:

This account is not eligible, please contact your customer service representative for any questions.

Unlock technician pricing and exclusive Pro benefits at Repair Clinic. Join free today.

Repair Clinic Pro

Repair Clinic Pro | Discounts & Benefits for Technicians

Your discounted pricing and other Pro benefits are now available.

Thank You for joining Repair Clinic Pro!

Return parts & products within 365 days of placing your order.

Adhesives & Sealants Parts

Appliance Adhesive & Sealant Parts

Air Filters

Air Filters for Home

Appliance Cleaners

Appliance Cleaners for Sale

Dishrack Parts

Dishrack Replacement Parts

Dryer Vents

Dryer Venting Parts

Equipment Covers

OPE, HVAC & Appliance Part Covers

Fuel Treatments

Fuel System Treatments

Hardware & Fasteners

Hardware and Fasteners Parts

Kitchen Appliance Accessories

Kitchen Accessories Parts

Washer & Dryer Accessories

Dryer and Washer Accessories

Light Bulb Parts

Light Bulb Fixture Parts

Oil & Lubricants

Oil and Lubricant Parts

Paint & Supplies

Touch Up Paint & Supplies

Power Cords Parts

Power Cord Repair Parts

Safety Equipment Parts

Safety Equipment Spare Parts

Testing Equipment Parts

Testing Appliance, OPE & HVAC Parts

Specialty Tools Parts

Specialty Tool Parts for Sale

Vacuum Attachments

Vacuum Attachment Parts

Water Filters & System Parts

Water Filter System Parts

Water Treatment Parts

Water Treatment System Parts

Wire & Connector Parts

OPE, HVAC & Appliance Wire & Connector Parts

Lawn Care Supplies

Yard Care Supplies

Heating & Cooling Supplies

HVAC Supplies

CHANNELLOCK Tools Parts

CHANNELLOCK Replacement Tools

Gas Cans & Nozzles

Nozzles & Gas Cans for Sale

Maintenance Repair Kits

Maintenance Appliance Repair Kits

OPE cleaners & Filters Parts

Outdoor Power Equipment Cleaners & Filters

Power Tools Parts

Power Tool Replacement Parts

Appliances

Refrigerator

Dryer

Range/Stove/Oven

Washing Machine

Dishwasher

Washer/Dryer Combo

Microwave

Freezer

Oven/Microwave Combo

Trash Compactor

Ice Machine

Range Vent Hood

Vacuum Cleaner

Garbage Disposer

Dehumidifier

Hot Water Dispenser

Heating & Cooling

Furnace

Packaged Unit/RTU

Heat Pump

Central Air Conditioner

Air Conditioner

Air Handler

Humidifier

Rheem

Wire Harness

Wire, Receptacle & Wire Connector

This free troubleshooting video shows quick maintenance tips for taking care of your Gree PTAC Unit. If you're unable to find the information you need on our website, we suggest that you use a search online to find a reliable online repair forum. It's likely that your question has already been answered there. We also recommend contacting your product's manufacturer or calling a local repair technician. And don't forget to like and comment on this video, and subscribe to our channel!

PTAC Unit Maintenance Tips

This video provides step-by-step instructions for replacing a worm gear bearing on Mantis tillers. The most common reason for replacing a worm gear bearing is if it is worn, which causes the tiller to leak grease. All of the information in this bearing replacement video is applicable to the following brands: Mantis Tools used: adjustable wrench, Phillips head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Worm Gear Bearing Replacement #432

This video provides step-by-step repair instructions for replacing the worm gear on a Mantis tiller. The most common reason for replacing the worm gear is when it is stripped from lack of lubrication. All of the information for this worm gear replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flathead screwdriver

Mantis Tiller Worm Gear Replacement  #429

Repairing a Mantis tiller? This video shows the proper and safe way to disassemble a tiller and how to access parts that may need to be testing and/or replaced. Tools needed: adjustable wrench, hammer, flat-head screwdriver, Phillips-head screwdriver, 10mm wrench, pliers, 7/16th inch socket and wrench, 5/16th inch socket, 10mm socket

Mantis Tiller - How to Disassemble a Tiller

This video provides step-by-step repair instructions for replacing the tine drive shaft on a Mantis tiller. The most common reason for replacing the tine drive shaft is when making repairs to the engine. All of the information for this tine drive shaft replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Drive Shaft Replacement #431

This video provides step-by-step instructions for replacing the clutch drum assembly on Mantis tillers. The most common reason for replacing the clutch drum is if the tiller won’t start. All of the information in this clutch drum assembly replacement video is applicable to the following brands: Mantis Tools used: 5/16” socket, 10mm socket

MantisTiller Clutch Drum Assembly Replacement #400131

This video provides step-by-step repair instructions for replacing the trigger handle on a Mantis tiller. The most common reason for replacing the trigger handle is when the cables are broken or bent and the engine won’t start. All of the information for this trigger handle replacement video is applicable to the following brands: Mantis Tools needed: 10mm wrench, pliers, 7/16th inch socket and wrench

Mantis Tiller Trigger Handle Replacement #400290

This video provides step-by-step instructions for replacing the clutch bearing on Mantis tillers. The most common reason for replacing the clutch bearing is if it wears out or the tiller is noisy. All of the information in this bearing replacement video is applicable to the following brands: Mantis Tools used: 5/16” socket, 10mm socket

Tiller Clutch Bearing Replacement – Mantis Tiller   #400132

This video provides step-by-step repair instructions for replacing the transmission drive shaft on a Honda small engine. The most common reason for replacing the drive shaft is when making another repair to the engine. Click here to purchase part #468: www.repairclinic.com/PartDetail/Drive-Shaft/468/1926544?TLSID=1876 All of the information for this transmission drive shaft replacement video is applicable to the following brands: Mantis Tools needed: 5/16th inch socket

Mantis Tiller Transmission Drive Shaft Replacement #468

This video provides step-by-step repair instructions for replacing the tine shaft bearing seal on a Mantis tiller. The most common reasons for replacing the tine shaft seal are when it is damaged or missing. All of the information for this tine shaft bearing seal replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Shaft Bearing Seal Replacement #434

This video provides step-by-step instructions for replacing the tine shaft bearing retainer on Mantis tillers. The most common reason for replacing the tine shaft bearing retainer is if it is damaged or missing. All of the information in this tine shaft bearing retainer replacement video is applicable to the following brands: Mantis Tools used: adjustable wrench, Phillips head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Shaft Bearing Retainer Replacement #435

This video provides step-by-step repair instructions for replacing the gear case gasket on a Mantis tiller. The most common reason for replacing the gear case gasket is when it is damaged. All of the information for this gear case gasket replacement video is applicable to the following brands: Mantis Tools needed: Phillips-head screwdriver

Mantis Tiller Gear Case Gasket Replacement #436

This video provides step-by-step instructions for replacing the right-hand tine on Mantis tillers. The most common reason for replacing the tine is if it is worn. All of the information in this tine replacement video is applicable to the following brands: Mantis Tools used: none

Mantis Tiller Tine Replacement, Right #438RA

This video provides step-by-step repair instructions for replacing the left-hand tine on a Mantis tiller. The most common reason for replacing the tine is when it is worn-out. All of the information for this left-hand tine replacement video is applicable to the following brands: Mantis Tools needed: none

Mantis Tiller Tine Replacement, Left #438LA

This video provides step-by-step instructions for replacing the handle on Mantis tillers. The most common reason for replacing the handle is if it is misplaced or broken. All of the information in this handle replacement video is applicable to the following brands: Mantis Tools used: none

Mantis Tiller Handle Replacement #400315

This video provides step-by-step repair instructions for replacing the tine guard on a Mantis tiller. The most common reasons for replacing the tine guard are when it is damaged or missing. All of the information for this tine guard replacement video is applicable to the following brands: Mantis Tools needed: 7/16th inch socket and wrench, 5/16th inch socket, 3/8 inch socket

MantisTiller Tine Guard Replacement #465

Wire-Harness

Rheem AS-100544-02A Packaged Unit/RTU Wire Harness | Repair Clinic

Rheem Wire Harness AS-100544-02A

This part AS-100544-02A is compatible with:

Related Articles & Videos

Wire Harness Customer Reviews

Common Problems Fixed by the Wire Harness

Heat pump circuit breaker keeps tripping

About the Wire Harness

Alternative Part Number(s)

Talk With Us

Talk With Us