Shop replacement repair parts for Toro Leaf Blower model 62925/SERIAL: 210000001-210999999

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

Lock nut with nylon insert.

Nylon insert locking nut. Used as part of the shear bolt assembly, as well as other locations within the equipment.

Fuel cap

Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.

Screw, HH

Fuel Shut-off Valve, In-Line Valve, 90 Degree Valve, 3.5 & 5 HP Industrial Plus

Small engine carburetor bowl gasket.

Ignition coil. The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start. If your engine was built before date code 101230xx, you will need to order a new Governor Arm see Related Items below.

Carburetor needle & seat kit. Comes with installation instructions. The float needle allows fuel to enter the float bowl. If the float needle is stuck closed, the engine will not get fuel and thus will not start.

Fuel inlet hose connector

Valve spring retainer

Spark plug wrench designed to fit Briggs & Stratton Over Head Valve engines. Combination 13/16" on one end and 5/8" on the other.

Carburetor float bowl kit

Recoil starter assembly