Keep your Carrier 58PAV111-16116 furnace running efficiently with genuine OEM replacement parts from Repair Clinic. The 58PAV111-16116 is a 111,000 BTU input, 80% AFUE upflow gas furnace from Carrier at the top of the 58PAV output range. At 111,000 BTU this furnace cycles aggressively on cold days, accumulating igniter thermal cycles and inducer bearing hours faster per season than lower-output 58PAV models. The furnace uses standard metal B-vent, produces no condensate, and has a straightforward non-condensing service profile. Repair Clinic stocks genuine Carrier OEM parts for the 58PAV111-16116 including the Carrier igniter parts, Carrier flame sensor parts, Carrier draft inducer motor parts, Carrier blower motor parts, and Carrier control board parts. Browse the Carrier furnace parts catalog filtered by 58PAV111-16116 for the complete parts inventory.
58PAV111-16116: Carrier 111,000 BTU Upflow Furnace at the Top of the 58PAV Platform
The Carrier 58PAV111-16116 at 111,000 BTU is the highest-output configuration in the 58PAV series, placing the greatest combustion gas volume demands on the inducer motor and accumulating igniter thermal cycles faster than 090 or lower-output siblings on the same platform. Read the control board LED blink code before ordering any replacement. The Carrier furnace troubleshooting guide covers fault code blink patterns for the 58PAV platform control board.
Most Replaced Parts on the Carrier 58PAV111-16116
Igniter for the Carrier 58PAV111-16116
At 111,000 BTU the 58PAV111-16116 cycles more frequently on cold days than lower-output 58PAV models, accumulating igniter thermal cycles faster per season. Testing resistance at room temperature with power off confirms failure in under two minutes.
Carrier 58PAV111-16116 Flame Sensor
Annual cleaning with fine steel wool extends sensor service life on the 58PAV platform and eliminates most early-season nuisance lockouts.
Draft Inducer Motor for the 58PAV111-16116
At 111,000 BTU the inducer handles the greatest combustion gas volume in the 58PAV series. Bearing failure presents as grinding during the pre-purge phase. An audible bearing should be replaced before complete seizure causes a heating emergency.
Carrier 58PAV111-16116 Control Board
Read and document the two-digit LED blink code before ordering any replacement. The 16116 cabinet configuration suffix should be confirmed from the data plate before ordering a replacement board.
Why Choose Repair Clinic for Carrier 58PAV111-16116 Parts
- Genuine Carrier 58PAV OEM Components: Igniters, flame sensors, and inducers confirmed for the 58PAV111-16116 111,000 BTU 16116 cabinet configuration Carrier furnace parts.
- Fault Code Diagnostic Resources: The Carrier furnace troubleshooting LED blink code chart for the 58PAV platform is available alongside every 58PAV111-16116 part listing.
- 111 vs 090 Output Differentiation: The 111,000 BTU and 90,000 BTU inducer motor specifications on the 58PAV platform are catalogued separately to prevent cross-substitution errors.
- 365-Day Returns: Return any uninstalled Carrier part within a full year of purchase with no restocking fees.
Carrier 58PAV111-16116 Furnace Parts FAQ
What is the BTU output and efficiency of the Carrier 58PAV111-16116?
The 58PAV111-16116 is a 111,000 BTU input, 80% AFUE upflow gas furnace from Carrier’s Payne-Carrier series. The 111 identifies 111,000 BTU capacity and the 16116 identifies the cabinet width and production configuration within the 58PAV platform.
How is the Carrier 58PAV111-16116 different from the 58PAV090?
The 58PAV111-16116 delivers 111,000 BTU while the 58PAV090 delivers 90,000 BTU on the same 58PAV Payne-Carrier platform. The inducer motor is sized for each output class and must not be cross-substituted between the 111 and 090 configurations.
My Carrier 58PAV111-16116 keeps locking out. Where do I start?
Read the control board LED fault code first. The two-digit blink pattern on the LED identifies the failed component before any physical diagnosis begins. At 111,000 BTU the igniter accumulates thermal cycles faster per season than lower-output 58PAV models.
What type of venting does the Carrier 58PAV111-16116 require?
The 58PAV111-16116 is an 80% AFUE non-condensing upflow furnace requiring standard metal B-vent. It produces no condensate and does not require PVC plastic venting.
