Keep your Carrier 58RAV095-16116 furnace running efficiently with genuine OEM replacement parts from Repair Clinic. The 58RAV095-16116 is a 95,000 BTU input, 80% AFUE upflow gas furnace from Carrier’s Raytherm series and is one of the longer-running Carrier residential upflow furnace platforms in active service. At 95,000 BTU this furnace cycles aggressively on cold days, accumulating igniter thermal cycles and inducer bearing hours faster than lower-output models. Repair Clinic stocks genuine Carrier OEM parts for the 58RAV095-16116 including the Carrier igniter parts, Carrier flame sensor parts, Carrier draft inducer motor parts, and Carrier control board parts. Browse the Carrier furnace parts catalog filtered by 58RAV095-16116 for the complete parts inventory.
Carrier Raytherm 95,000 BTU Upflow Platform at the 16-Inch Cabinet Width
The Carrier 58RAV Raytherm series is an 80% AFUE upflow platform that shares many ignition component specifications with related Carrier residential lines, making parts both widely available and well-documented. At 95,000 BTU the 58RAV095-16116 accumulates igniter thermal cycles faster per season than lower-output models in the same series, and its larger inducer handles proportionally more combustion gas volume per hour of heating operation. The Carrier furnace troubleshooting guide covers fault code blink patterns for the 58RAV platform control board.
Most Replaced Parts on the Carrier 58RAV095-16116
Igniter for the Carrier 58RAV095-16116
At 95,000 BTU the 58RAV095-16116 cycles frequently in cold weather, accumulating igniter thermal stress at a higher rate per season than lower-output Carrier models. The igniter must heat to temperature within the control board timing window on every heating call. Testing resistance at room temperature with power off confirms or rules out igniter failure in under two minutes before any other component is inspected.
Carrier 58RAV095-16116 Flame Sensor
The flame sensor confirms sustained combustion after ignition by passing a micro-amp signal back to the control board as an oxidized sensor rod reduces this current below the board’s acceptance threshold, causing the furnace to light and shut off within seconds before lockout. Annual cleaning of the sensor rod with fine steel wool extends service life on the Raytherm platform and eliminates most early-season nuisance lockouts.
Draft Inducer Motor for the 58RAV095-16116
The inducer is sized for 95,000 BTU combustion gas throughput, creating the negative pressure that opens the pressure switch and permits the ignition sequence to proceed. Grinding at inducer startup indicates bearing failure that should be addressed before seizure causes a complete heating failure. The 58RAV095 inducer runs on every heating call, accumulating hours faster than on lower-output models.
Control Board for the Carrier 58RAV095-16116
Read and document the LED fault code before ordering any replacement component. A board that produces the same fault code after all identified components have tested good is a strong indicator that the board itself has failed. This is a pattern that typically produces a repeated two-digit LED blink code with no clear component explanation.
Why Choose Repair Clinic for Carrier 58RAV095-16116 Parts
- Genuine Carrier Raytherm OEM Components: Igniters, flame sensors, and inducers confirmed for the 58RAV095-16116 95,000 BTU 16-inch cabinet platform — Carrier furnace parts.
- Fault Code Diagnostic Resources: The Carrier furnace troubleshooting LED blink code chart for the 58RAV platform is available alongside every part listing so no need to search elsewhere for the code chart.
- High-Output Furnace Service Notes: 95,000 BTU igniter wear rates and inducer bearing inspection guidance specific to cold-climate installations are included with component listings.
- Same-Day Dispatch: In-stock parts ordered by 9:00 PM ET ship the same day, with 365-day returns on all uninstalled components.
Carrier 58RAV095-16116 Furnace Parts FAQ
What is the BTU output and efficiency of the Carrier 58RAV095-16116?
The 58RAV095-16116 is a 95,000 BTU input, 80% AFUE upflow gas furnace from Carrier’s Raytherm series in the 16-inch cabinet width and is one of Carrier’s longest-running and most widely serviced residential upflow furnace platforms.
How is the Carrier 58RAV095-16116 different from the 58PAV070-12012?
The 58RAV095 is a 95,000 BTU model on the Raytherm platform and the 58PAV070 is a 70,000 BTU Performance series model on a different Carrier platform. Both are 80% AFUE upflow furnaces, but component specifications differ between the two product lines.
Why does my Carrier 58RAV095-16116 inducer make noise at startup?
Grinding or squealing at inducer startup indicates bearing wear accumulated over years of heating season operation. An audible bearing on the 58RAV095 should be scheduled for replacement before complete seizure causes a total heating failure, typically on the coldest night of the year.
Where can I find wiring diagrams for the Carrier 58RAV095-16116?
Wiring diagrams for the 58RAV095-16116 are available on the Repair Clinic product page under the Diagrams tab. Carrier also prints a wiring schematic on the inside of the furnace cabinet access panel for field reference during service calls.
