Price Match GuaranteeTrane Furnace TDC040C924B0 Parts
Shop replacement repair parts for Trane Furnace model TDC040C924B0
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Control; fuse link, open at 333 deg f
Capacitor; run, 7.5 mfd, 440v oval, w/o resistor
Transition receptacle, includes four mounting screws
Door switch, 21 amps, 125/250 vac
Thermal limit switch, open at 230F, close at 200F.
Brass orifice spud, drill #45
Gasket;collector box
Resilient ring, 2 required
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406
Switch;reverse flow, open:130 deg f/close:120 deg f
Blower motor, 1/5 HP, 115 volts, 1080 RPM's, 4 speed, 60 herta, 1 phase, counterclockwise rotation
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic