Shop replacement repair parts for Trane Furnace model TUJ100A948A0

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket; venter assembly

Blower Motor, 1/2 HP 115 Volts 48 Frame 1075 RPM 4 Speed. Requires 20 MFD Capacitor

Brass orifice spud, drill #45

Resilient ring, 2 required

Switch; reverse flow, open 140f, close 130f,

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Thermal limit switch, opens at 200 degrees and closes at 170 degrees

