Shop replacement repair parts for Trane Furnace model TUX080C942B0

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Thermal limit switch, open at 190 degrees, close at 160 degrees

Transition receptacle, includes four mounting screws

Door switch, 21 amps, 125/250 vac

MOTOR; 1/3 HP, 115/60/1 1075 RPM, 48 FRAME, PSC

Brass orifice spud, drill #45

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket;collector box

Resilient ring, 2 required

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Flue box