Shop replacement repair parts for Trane Furnace model TUX080C942B2

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Thermal limit switch, open at 180 degrees, close at 150 degrees

Run Capacitor, 10 uf, 440 VAC

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Transition receptacle, includes four mounting screws

Door switch, 21 amps, 125/250 vac

MOTOR; 1/3 HP, 115/60/1 1075 RPM, 48 FRAME, PSC

Brass orifice spud, drill #45

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket;collector box

Resilient ring, 2 required

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Filter; permanent, 25 x 16.5 x 1in.