Price Match GuaranteeTrane Furnace TUX100C948A1 Parts
Shop replacement repair parts for Trane Furnace model TUX100C948A1
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Thermal limit switch, open at 190 degrees, close at 160 degrees
Blower Wheel 11.7 by 10.6 inches.
Transition receptacle, includes four mounting screws
Door switch, 21 amps, 125/250 vac
Brass orifice spud, drill #45
Draft inducer motor, one stage with shaded pole motor *Note: All models use this part with the exception of: *UX/DX100A, UX/DX100C, UX/DX1C100, UX1D100, UX/DX120A, UX/DX120C. These select models use item 2458691.
Resilient ring, 2 required
Run capaciitor, round, 20 MFD, 440 volts
Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406
Wire; ignition harness
Condensate tube assembly, 23 inches. Kit includes: Hose, clamp, barbed adapter, coupling, small hose with barred connector.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic