Price Match GuaranteeYork Furnace P1CXD12N08001A Parts
Shop replacement repair parts for York Furnace model P1CXD12N08001A
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Run capacitor, single,10mfd,370 volts, oval
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
2.8 oz Tube of Red Devil High Temp RTV Silicone. Perfect for Gasket replacement. Not for Heat Exchangers.
Gas valve kit
Orifice,burner drill size 45
Limit switch,160 open,130 close
Blower wheel, 10 x 10 , CW, 1/2" bore
Transformer, 120 volt primary 24 volt secondary 40 va
Flame rollout limit switch 320 degrees F open, manual reset
Pressure switch
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic