Price Match GuaranteeLuxaire Furnace FL9T080C20UP11A Parts
Shop replacement repair parts for Luxaire Furnace model FL9T080C20UP11A
Gas Burner Tube
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Blade fuse. ATC-3 (3 Amp)
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Pressure switch tubing .313 OD .188 ID
High limit thermostat -140 open, 110 close
Orifice,burner drill size 45
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Blower motor mounting kit
Blower wheel 11x11, cw, 1/2" bore
Limit Switch
Transformer, 120 volt primary 24 volt secondary 40 va
Combustion blower gasket
Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic