Price Match GuaranteeLuxaire Furnace PBKM-LD12N080G Parts
Shop replacement repair parts for Luxaire Furnace model PBKM-LD12N080G
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Genteq Run Capacitor 370 Volt Oval Single 7.5 MFD
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
2.8 oz Tube of Red Devil High Temp RTV Silicone. Perfect for Gasket replacement. Not for Heat Exchangers.
Orifice,burner drill size 45
Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214
Flame rollout limit switch 185 degrees F open, manual reset
Limit switch,160 open,130 close
Transformer, 120 volt primary 24 volt secondary 40 va
Flame rollout limit switch 320 degrees F open, manual reset
Blower Wheel 7" x10" Clockwise 1/2inch bore
Pressure switch
Igniter kit with bracket, screw, and adapter
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic