Price Match GuaranteeLuxaire Furnace PBKM-LD20N100F Parts
Shop replacement repair parts for Luxaire Furnace model PBKM-LD20N100F
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Run capacitor, single,10mfd,370 volts, oval
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
2.8 oz Tube of Red Devil High Temp RTV Silicone. Perfect for Gasket replacement. Not for Heat Exchangers.
Blower wheel, 11 x 10, cw, 1/2 bore
Orifice,burner drill size 45
Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214
Flame rollout limit switch 185 degrees F open, manual reset
Transformer, 120 volt primary 24 volt secondary 40 va
Limit switch, 370 open, manual re-set
Auto reset limit control
Pressure switch
Igniter kit with bracket, screw, and adapter
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic