Shop replacement repair parts for Luxaire Furnace model PBLU-LD14N100

Furnace control board. The control board regulates the supply of power to the furnace components.

Gas Burner Tube

Run capacitor, single,10mfd,370 volts, oval

Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open

Gas valve kit

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Limit themrostat switch

Blower wheel, 10 x 10 , CW, 1/2" bore

Transformer, 120 volt primary 24 volt secondary 40 va

Pressure switch

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Run capacitor 370 volt oval single 4 microfarads

Igniter kit with bracket, screw, and adapter

Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.

Air pressure switch