Shop replacement repair parts for Luxaire Furnace model PBLU-LD16N080

Furnace control board. The control board regulates the supply of power to the furnace components.

Gas Burner Tube

Run capacitor, single,10mfd,370 volts, oval

Gas valve kit

Pressure switch

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

3/4HP 115Volts 60Hz 11 amp 1060 RPM's 3 Speed Open Enclosure 48Y Frame Single Phase CCW 3.5" Shaft

Limit switch,160 open,130 close

Transformer, 120 volt primary 24 volt secondary 40 va

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Run capacitor 370 volt oval single 4 microfarads

Blower wheel 11"dia 8"w cw 1/2" bore

Igniter kit with bracket, screw, and adapter

Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.

Air pressure switch