Price Match GuaranteeLuxaire Furnace PBLU-LD20N100 Parts
Shop replacement repair parts for Luxaire Furnace model PBLU-LD20N100
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Gas valve kit
Blower wheel, 11 x 10, cw, 1/2 bore
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Limit themrostat switch
Transformer, 120 volt primary 24 volt secondary 40 va
Pressure switch
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Run capacitor 370 volt oval single 4 microfarads
Igniter kit with bracket, screw, and adapter
Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.
Air pressure switch
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic