Shop replacement repair parts for Luxaire Furnace model PBNU-LD10P060A

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Genteq Run Capacitor 370 Volt Oval Single 7.5 MFD

Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 6.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise LE
Frame: 48
Enclosure: Open
Shaft Length: 4”

Igniter kit with bracket, screw, and adapter

Contact,socket,split pin universal (m10)

Relay, 24 volts coil, 50/ 60 hertz

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Universal, single stage, fast open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Fusible link control rollout

Filter,air,cleanable,26 x 16 x 1


Burner box cover gasket, 5/8 x 1ft (M50)

Ignition module,kit


Orifice, burner #56 (.0465)