Shop replacement repair parts for Luxaire Furnace model PBNU-LD16N120D

Run capacitor, single,10mfd,370 volts, oval

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open

Blower wheel, 10 x 10 , CW, 1/2" bore

Igniter kit with bracket, screw, and adapter

Fan and limit controller 11 1/2"

Contact,socket,split pin universal (m10)

Relay, 24 volts coil, 50/ 60 hertz

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Universal, single stage, fast open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Fusible link control rollout


Burner box cover gasket, 5/8 x 1ft (M50)

Ignition module,kit

Blower motor mounting bracket kit