Price Match GuaranteeLuxaire Furnace PBNU-LD20N140C Parts
Shop replacement repair parts for Luxaire Furnace model PBNU-LD20N140C
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Blower wheel, 11 x 10, cw, 1/2 bore
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Igniter kit with bracket, screw, and adapter
Fan and limit controller 11 1/2"
Contact,socket,split pin universal (m10)
Relay, 24 volts coil, 50/ 60 hertz
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Universal, single stage, fast open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.
Fusible link control rollout
Filter,air,cleanable,26 x 16 x 1
Burner box cover gasket, 5/8 x 1ft (M50)
Ignition module,kit
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic