Price Match GuaranteeLuxaire Furnace PCDFBLD12N100B Parts
Shop replacement repair parts for Luxaire Furnace model PCDFBLD12N100B
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Genteq Run Capacitor 370 Volt Oval Single 7.5 MFD
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Blade fuse. ATC-3 (3 Amp)
Gas valve kit
Orifice,burner drill size 45
Pressure switch
Limit switch,160 open,130 close
Transformer, 120 volt primary 24 volt secondary 40 va
Limit switch, 370 open, manual re-set
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic