Shop replacement repair parts for Luxaire Furnace model PKMU-LD12N057B

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Genteq Run Capacitor 370 Volt Oval Single 7.5 MFD

Igniter kit with bracket, screw, and adapter

Blower Wheel 7" x10" Clockwise 1/2inch bore

Contact,socket,split pin universal (m10)

Relay, 24 volts coil, 50/ 60 hertz

Universal, single stage, fast open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Two feet of clear plastic tubing, .125 ID

Fan and limit controller with 8 inch insertion

Filter,air,cleanable,26 x 16 x 1

Gasket,venter,inlet,80+


Ignition module,kit


Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.