Price Match GuaranteeMaytag Dryer MEDX700XL1 Parts
Shop replacement repair parts for Maytag Dryer model MEDX700XL1
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.
Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.
Dryer idler pulley assembly. Includes bracket and pulley wheel
Dryer door switch assembly. If the dryer does not start then the door switch could be defective. This switch also replaces the two wire switch.
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
Dryness sensor bar
Plastic leveling leg. White approximately 1" round x 1 3/4" long
Dryer heating element wire connector kit. Wire with spade terminal & wire nut
RC Item #2754401
Dryer tri-ring retainer for drum support rollers.
Light Bulb 10 Watt small base
Outer grille
Dryer drum drive belt 92 1/2"
RC Item #4363333
Motor pulley
Spring clip inside control knob
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic