Shop replacement repair parts for Amana Dryer model YNED5700BW0

Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel

Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.

Dryer idler pulley assembly. Includes bracket and pulley wheel

Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.

Dryer heating element wire connector kit. Wire with spade terminal & wire nut

Door hinge pin cap

Spring clip inside control knob

Seal, blower cover plate. 26 in

Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.

Wire harness

Electric dryer power cord kit, 4 foot 30 Amp 3 wire w/closed eyelets & strain relief

Stacking kit for hybrid dryer

Four way dryer exhaust kit for side and bottom venting

Dryer rack for shoes and delicate items. Keep your items from tumbling or becoming tangled by using a dryer rack. This part fits Whirlpool Duet Premium, Vantage, and Maytag Maxima dryers.

Electric dryer power cord kit, 6 foot 30 Amp 4 wire with closed eyelets and strain relief