Shop replacement repair parts for Carrier Furnace model 399AAW060100-B

Gas burner tube

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

Transformer, 120V-24V 40VA

High efficiency furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

12" x 10" blower wheel, 1/2" bore, CW.

Limit switch, 160 degree

Inducer motor fan blower wheel. 5.6 x 1.55 in, bore 5/16 in, CW hub end

Pressure switch

Nat. to LP. Conversion Kit. Valve only, *does not include orifices also needed. **Should be installed by a certified Trane repairperson.

.44 Orifice. Bag of 7. Natural Gas. *Should be installed by a certified Carrier repairperson.

Silicone tubing 60" long

Inducer control board

Spring Conversion kit, L.P to Natural. *Does not include orifices also needed. *Should be installed by a certified repairperson.

Pilot wire harness

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.