Shop replacement repair parts for Carrier Furnace model 58DR-100-141AB

Heat/cool furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Grommet, motor mounting bracket. Sold as a single grommet but we suggest purchasing three since there are 3 holding the motor in place, and it’s a good practice to change all of them while the assembly is taken apart.

Transformer, 120V-24V 40VA

High limit thermostat, 170 degrees Fahrenheit

Burner assembly

Fuse

Blower Motor Type: Shaded Pole; HP: 1/5 - 1/6 - 1/7; Volts: 115; RPM: 1050; Speeds: 3; Amps: 6.7-5.3-4.7; Enclosure: Open Vent.; Rotation: Clockwise; Bearings: Sleeve; Shaft: 1/2 X 4 1/8"; "A" Dimension (inches): 3 7/8"

Screw assy 1/4 hex

Nat. to LP. Conversion Kit. Valve only, *does not include orifices also needed. **Should be installed by a certified Trane repairperson.

Fuse Link Kit

Spring Conversion kit, L.P to Natural. *Does not include orifices also needed. *Should be installed by a certified repairperson.

Ignition module

Gasket


Conversion kit
*Should be installed by a certified Carrier repairperson.