Shop replacement repair parts for Carrier Furnace model GA1AAD024050ABJA

Single run capacitor 440V 7.5 mfd

Gas burner tube

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

Limit switch

Blower wheel for draft inducer motor 4" Diameter 1.5" Width

Grommet, motor mounting bracket. Sold as a single grommet but we suggest purchasing three since there are 3 holding the motor in place, and it’s a good practice to change all of them while the assembly is taken apart.

Transformer, 120V-24V 40VA

Door switch

Gasket kit for draft inducer motor

Clip

High limit thermostat, 180 degrees Fahrenheit

Fuse

Thermocouple, 36 inches