Shop replacement repair parts for Kenmore Washer/Dryer Combo model 417.99395820

Dryer drum drive belt, 93 1/2 inches long, 4 ribs 3 grooves. The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken.

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer idler pulley wheel kit. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Drive motor kit - Note; the wiring connections may be different, comes with instructions

Washer drive belt. If this belt is broken, the washer will not spin or agitate.

Bearing cup for drum support ball

Dryness control board

Idler Pulley Assembly

Washer drive motor

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 131309100 Drive Motor

Drum felt seal & glides