Shop replacement repair parts for York Furnace model 6MG10

Furnace control board. The control board regulates the supply of power to the furnace components.

Gas Burner Tube

Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.

Gas valve kit

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Orifice,burner drill size 45

Pressure switch

Cap,run single,5mfd,370v,oval

Furnace draft inducer motor assembly. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Transformer, 120 volt primary 24 volt secondary 40 va

Pressure Switch, -0.75 SPNO contacts close on fall

Natural gas to LP conversion kit. *Should be installed by a certified York repairperson.

Gasket,venter motor,150 deg f

Limit switch
