Price Match GuaranteeLennox Furnace ML180DF090XP48B-51 Parts
Shop replacement repair parts for Lennox Furnace model ML180DF090XP48B-51
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Igniter assembly (120 volt)
Ignition control board The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.
RC Item #2346648
Gas valve
Capacitor single run 7.5 MFD 370 Volt oval
Switch-interlock
Pressure switch .68" wc spst 1/4" barb connection
Transformer, 120 Volt Primary 24 Volt Secondary 40 VA
Blower wheel, 10 5/8 length 10 5/8 diameter, 1/2 inch bore
1/2HP 115Volts 60Hz 8 amp 1075 RPM's 5 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft. Any unused wires will need to be taped off or put on the "park" terminals on the control board. These terminals are there specifically for unused wires.
Limit control, rollout, 210f
Inducer Motor Orifice Plate Gasket
Limit control, 135 f
Gas valve conversion kit, natural to LP. *Should be installed by a certified Carrier repairperson.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic