Shop replacement repair parts for Carrier Furnace model 58RAV090-101JC

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Gas burner tube

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

Limit switch

Transformer, 120V-24V 40VA

Gasket kit for draft inducer motor

Grommet, motor mounting bracket. Sold as a single grommet but we suggest purchasing three since there are 3 holding the motor in place, and it’s a good practice to change all of them while the assembly is taken apart.

Clip

Igniter replacement kit

High limit thermostat, 200 degrees Fahrenheit

Pressure switch

Limit switch

Blower wheel 11-1/8" d x 8" w 1/2" shaft cw from hub