Price Match GuaranteeWhirlpool Dryer WED85HEFC1 Parts
Shop replacement repair parts for Whirlpool Dryer model WED85HEFC1
Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.
Dryer idler pulley assembly. Includes bracket and pulley wheel
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
Dryness sensor bar
Plastic leveling leg. White approximately 1" round x 1 3/4" long
Dryer heating element wire connector kit. Wire with spade terminal & wire nut
Thermal cut out fuse and high limit thermostat kit
Door hinge pin cap
RC Item #941412
Spring clip inside control knob
Screw, 10-24 x 1/2
Seal, blower cover plate. 26 in
Hi-limit thermostat & thermistor assembly on heating element housing, L295-80F Thermistor should read around 50 to 60Kohms at room temperature.
RC Item #4961410
Door Glass Seal
Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.
Dryer drum drive motor. Includes pulley for drum belt
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic